Skip to product information
1 of 4


67-87 Truck HD Motor Mounts Frame Side

Regular price $112.00 USD
Regular price Sale price $112.00 USD
Sale Sold out
Shipping calculated at checkout.

Motor mounts that take the most demanding horse power and torque numbers!

Applications: 1967-1972 C10 C20 2wd blazer 1973-1987 (1988, 1989, 1990, 1991) GM Truck/SUV 4x4 and 2wd (K10, K20, K30, K5, V1500, V2500, V3500, C10, C20, C30, M1008, M1009)

Dont forget to select which motor you are going with! We have brackets for 

Small & Big block Chevy/ 6.2, 6.5 Diesel

Gen 3&4 LS motors

Gen 5 LT motors

Why use the Hogback Fab HD Motor Mounts?

So you just got done rebuilding your motor with all the power adders and are ready to put back in your truck and burn some rubber. Are you putting your motor on the stock mounts? Heck no! You need something that can stand up to the abuse. That is where our HD motor mounts come in. The are engineered to take on the highest HP race motors out there!

Comes Powder coated Gloss black with Grade 8 hardware (even the bolts to mount to the block and frame).

How easy is it to install the HD motor mounts?

Very Easy!

  1. If your motor is still in the truck, you will need to unhook the stock motor mounts and lift the motor high enough to remove/replace the mounts. The motor will need to safely be lifted with an engine hoist. Make sure nothing will get stretched/broken like wires, fuel lines, etc.
  2. Remove the stock motor mounts from the block and frame.
  3. Loosely bolt on the block side HD mount to the block and the frame side to the frame. We say loosely so you can adjust the mounts around when lowering the engine.
  4. Lower the motor on to the new frame side mount. Note: as we all know these frames are noodle and move around a lot. It may take some moving around of the mounts up, down, forward, rearward for the main bolt to pass through.
  5. Slide the 9/16" main bolt through the two motor mount halves and tighten down.
  6. Tighten the frame and block side mounts
  7. Reconnect anything you may have unhooked when lifting the motor.
  8. Enjoy your new found strong mounts!
  9. After 100 miles make sure to go check all bolts are tight. 

HOG TIP: These are just the frame side but we have the motor side for many options:

Small block, big block Chevy, 6.2/6.5 Diesel HERE

Gen 3/4 LS motors HERE

Gen 5 LT motors HERE

Note:  For LS/LT motor swaps the stock location of the A/C compressor can not be retained, there are many companies in the aftermarket offering up high A/C mounts. For trucks that are 4x4 crossmember it will clear if you are using a 4x4 pan on the motor. Some very rare occurrences based on frame tolerances (and super old frame rivets shifting) a notch of the crossmember or spacing up the mount a little may be needed.  On 2wd trucks the stock crossmember will be fine. 

Note: If you are using our frame side to build something custom, it is a 3" bushing assembly with a 9/16" bolt.


Gloss black powder coated steel.

.25" thick steel

Product comes welded

Hardware is grade 8

Comes with frame mounting bolts, washers, and top lock nuts for block, frame, and mounts

Sleeves are chromoly

Bushings are Poly

Shipping & Returns

$15 shipping on orders valued $350 and under

Free shipping on orders $351 and up!

Returns accepted 30 days from delivery. Use the contact form to email us and get a return authorization

  • Free Shipping


    $15 shipping on orders valued $350 and under

    Free shipping on orders $351 and up!

    Canadian Orders

    Orders over $651 ship FREE!

    Note: Price does not include Duties or Taxes, these will need to be paid
    by the customer.

  • Hassle-Free Exchanges

    Order the wrong part? Send us
    an email on the contact form and we can help you get it all sorted out!